3 1/2 DIGIT THERMOCOUPLE METERS, TRANSMITTERS & CONTROLLERS
MODEL Q2000J / Q2000K / Q2000T
|
 |
|
OPTIONS
 Analog
output for user-selected span Single-setpoint
10 A relay control Dual-setpoint
10 A relay control Proportional
4-20 mA control Time-proportional
2 A SS relay control Parallel
BCD output, isolated NEMA-4 splash-proof
lens coverQUANTA Models Q2000J, Q2000K and Q2000T are 3 1/2 digit indicator/controllers for thermocouple types J, K and T, respectively. They are complete with linearization, cold-junction compensation, and sensor-break detection. Readout is in °C or °F with 1° resolution, as selected by push-on jumpers. What makes QUANTA exceptional is the wide choice of options. INPUT POWER AND DISPLAY OPTIONS Six types of meter power are available: 120 V ac, 240 V ac, 24 V ac, 5 V dc, isolated 9-32 V dc and isolated 26-56 V dc. An LED display is standard. An LCD display is optional and is recommended for viewing in bright ambient light. ANALOG OUTPUT OPTIONS A 1 mV/count (±2 V full-scale) analog output is standard and is useful for driving a strip-chart recorder. An additional analog output can be provided by an optional vertical plug-in board. Available output signals are 0-5 V dc, 0-10 V dc, 0-1 mA (source or sink), and 4-20 mA (source or sink). The top and bottom of each output range can be scaled to fit a user-selected display span. CONTROL OUTPUT OPTIONS Additional outputs can be provided by a horizontal upper board. Available options include single-setpoint control with one 10 A relay, dual-setpoint control with two 10 A relays, 4-20 mA proportional control (source or sink), time-proportional 2 A solid-state relay control, and isolated, parallel BCD output. For additional information, please refer to the QUANTA, Options, and Mechanical sections. SPECIFICATIONS ANALOG INPUT TC types: J (Iron-Constantan), K (Chromel-Alumel), T (Copper-Constantan) oo Calibration: To IPTS-68, as published in NIST monograph 125 (March 1974), ASTM E130-72 or ASA C96.2-1973 Configuration: Single-ended (-TC lead connected to ANA GND) Input resistance: 100 Mohm Sensor-break detection: 400 nA current source Max lead resistance for rated accuracy: 500ohm (type J ohm), 395ohm (type K ohm), 200ohm (type T ohm) Zero tempco (cold-junction error): ±0.06 deg/deg Span tempco, 10°C to 40°C: ±0.01% of reading/°C NOISE REJECTION NMR: 70 dB at 50/60 Hz Overvoltage protection: 120 V rms (continuous), 240 V rms (30 s max) CMR: 120 dB with 250 ohm imbalance CMV: 1500 Vp per HV test, 354 Vp per IEC spacing ANALOG-TO-DIGITAL CONVERSION Input configuration: Single-ended SIG HI (TC + ) lead connected to SIG GND through 10ohm Technique: Dual-slope, average-value Polarity: Automatic Signal integration period: 100 ms Read rate: 2.5/s DISPLAY LED: 0.56 in (14.2 mm) 7-segment, red LCD: 0.50 in (12.7 mm) 7-segment liquid crystal Symbols: 1.8.8.8 Decimal point positions: Three positions selectable by jumpers behind lens or at connector Sensor-break indication: Three least-significant digits blanked POWER AC voltages: 120, 240, 100 or 24 V ac +10%/15% AC frequency: 49-440 Hz DC voltages: 9-32 V dc, isolated to 300 Vp; 26-56 V dc, isolated to 300 Vp; 5 V dc ±5%, non-isolated Power consumption: 5 W max ENVIRONMENTAL Operating temperature: 0 to 60°C Storage temperature: 40 to +85°C Relative humidity: 95% at 40°C (non-condensing) MECHANICAL Dimensions: Newport DIN1A (1/8 DIN) case (see Mechanical section for drawings) Weight: 17 oz (480 g) Case material: 94V-0 UL-rated polycarbonate  
HOME / PRODUCT GUIDE / TECHNICAL REFERENCE NEWPORT Electronics, Inc. (714) 540-4914 or Contact Us Copyright 1999, Newport Electronics, Inc. All rights reserved. |
